A graduate of George Brown College of Applied Arts and Technology, Toronto, with a three-year diploma in electrical engineering technology, Chris began his career in the Physical Plant Department of George Brown College as a building controls specialist. While at the College, Chris managed the operations of a central building automation system encompassing 1.2 million square feet of building space. He also helped introduce a computerized preventative maintenance system as well as energy efficient building technologies.

In 1994, Chris became part of the management team at St. Michael’s Hospital in Toronto. His primary responsibility was the re-commissioning of an extensive building automation system, including improvements in facilities operations, contract management, and maintenance. When St. Michael’s Hospital assumed management and operation of the Wellesley Central Hospital in 1997, Chris’s management portfolio was expanded to include the Wellesley Central site, the old Princess Margaret Hospital, and Central Hospital.

Chris joined CFMS in 1999, where he now applies his considerable experience in building automation controls, facilities operations and facilities management. He has worked on notable projects of varying scope and size, and is also the General Manager of CFMS Consulting Inc.

Return To Team

Wendy graduated from Ryerson University with a Bachelor in Engineering. She is a member of the Professional Engineers of Ontario. Wendy began her career with Tour & Andersson as a control system engineer, where she was responsible for designing, commissioning and servicing of control systems for new construction and retrofit projects. After that, she joined the Toronto School Board and was in charge of programming, troubleshooting and maintaining the building automation systems for over 100 schools.

Wendy joined CFMS in 1994, bringing a wealth of building automation system experience. Wendy has been the main commissioning services contact for the Simcoe County District School Board for over 18 years. Recently she became the main contract for the York Region District School Board and the York Catholic District School Board. Wendy manages one of CFMS’ Toronto divisions.

Wendy has a thorough knowledge of the commissioning process, combined with strong management skills. She is an invaluable addition to any project.

Return To Team

Ed holds both M.Sc. and B.Sc. degrees in Engineering from the University of Guelph. He is a registered Professional Engineer of Ontario and a member of ASHRAE. He is also a certified LEED 2.0 Accredited Professional of the U.S. Green Building Council.

Ed has over 20 years of experience in the HVAC industry. Prior to joining CFMS, Ed Trueman spent 7 years with Smith and Andersen Consulting Engineering. During that time, Ed was involved with all aspects of mechanical consulting, from concept to final design, tendering, construction site supervision, project management and project close-out.

Ed joined CFMS’ Richmond Hill office in 1993. He is a Senior Project Manager responsible for quality control assessment. He manages many of the larger CFMS projects, including several hospitals and LEED projects.

Ed’s vast experience, knowledge, ability to evaluate mechanical systems and troubleshooting skills make him a valuable asset to both CFMS and its clients.

Return To Team

Sethuraman graduated with a Diploma in Refrigeration and Air-Conditioning Engineering, Higher National Diploma in Computing and a Masters degree in Administration. He has over 15 years of experience in the air-conditioning service industry, facilities operation and facilities management. In addition, he is knowledgeable in the areas of design, project management, energy and building automation and control systems.

Sethuraman joined Optimira Controls in 2004 where he was Designer/Controls, Supervisor/Engineering and Manager Engineering. Optimira Controls is a leading independent turnkey supplier of integrated building automation systems solutions.

Between 1992 and 2004, Sethuraman served as Chief Supervisor/Building Management System/West Coast Region at UAE Emirates Telecommunication Corporation (Etisalat). He led a group of engineers who were responsible for facilities operation and management, new and retrofit construction and the commissioning of mechanical and building automation systems.

Sethuraman joined CFMS in 2007 as a Project Manager. He manages new and retrofit construction, total building commissioning services – including Institutional, Hospital, Governmental, Commercial, Community Services buildings – as well as LEED NC and LEED CS projects.

Sethuraman’s vast experience in service, facilities operation, facilities management, commissioning, design, construction project management of building automation systems and building services make him an asset to any project.

Return To Team

Tom graduated from the University of Waterloo in 1977 with a Bachelor of Applied Science specializing in electrical engineering. He has over 20 years of experience in the area of controls installation and has been actively involved in numerous LEED projects.

Tom began his career at Johnson Controls Ltd., where he rose to the rank of Project Manager responsible for the installation of system controls. In 2003, he moved on to Optimira Controls Inc., where he served as s Senior Project Manager and was active in the design and programming of control systems, hiring and the coordination of installation subcontractors.

Tom joined CFMS in 2009 as a Senior Project Manager. Since joining CFMS, Tom has worked on projects of varying sizes including large Health care facilities, continuing care facilities and library and community centres. Tom has also worked on the commissioning scope for LEED EB and LEED CI projects. His strong appreciation and knowledge of all systems that are required to produce a fully operating building, make him a valuable member of the CFMS team.

Return To Team

Anand Narayanan has a post secondary diploma in Mechanical Engineering and is a certified technician from the OACETT. He started his career at a nuclear power project in India and gained hands-on experience in fabrication and field installation of specialized industrial structures and pipelines. He has also had a long career in the automotive industry serving in various divisions like quality control, product development, marketing and service.

During the past six years he has worked in various capacities with Johnson Controls, and In-Sync Controls, and has in-depth knowledge in HVAC controls and building systems.

At In-Sync Controls, he was managing various tasks from submittal & as-built drawings, graphics, purchasing, inventory control, commissioning support, project management and facilities operation.

At Johnson Controls he served in the capacity of System Designer, and his responsibilities included designing cost effective and practical control solutions, controls drawings and managing submittals, approvals and as-built documentation.

Anand joined CFMS in 2008 as a Jr. Project Manager. He has been involved in the commissioning process at various projects like Dupond Buildings, Sunnybrook Health Sciences Centre, Tedco-Corus, Honda Canada and Vaughan Civic Centre, Lakefield Primary Health Centre etc.

With his technical knowledge in BAS controls and mechanical systems and rich experience in project coordination and quality control, Anand is a valuable addition to the CFMS team.

Return To Team

Vanessa graduated from University of Waterloo in 2008 with a Bachelor of Applied Science in Mechatronics Engineering. Shortly after, she joined CFMS.

Vanessa has worked with all of the CFMS Project Managers, and has gained valuable experience in all aspects of the commissioning process. She currently works with Wendy Collins, in our School Boards Division, and now has over a year of experience handling school projects from renovations to new construction.

She is also completing her studies towards a P.Eng.

Return To Team

A graduate of Ryerson University with a Bachelor of Engineering, Jurij’s final year of study focused on thermo-fluid systems and HVAC system design. He is a member of the PEO Engineer-In-Training program, completing his studies towards a P. Eng. designation.

Jurij joined CFMS in 2009 and has been learning all about the commissioning process from CFMS's experienced Project Managers. He has been involved in numerous projects including institutional and governmental buildings, commercial offices, residential condominiums, LEED buildings and BAS retrofits.

Return To Team

Allan graduated from the College of the North Atlantic in 2009 as an Architectural Engineering Technologist, the focus of which lay on structures, mechanical systems and HVAC, both residential and industrial. As well, Allan did his final thesis on LEED certification.

He began his career at Tract Consulting, a landscape architecture firm in St. John’s, NL, but quickly made the leap to commissioning in January of 2010 when he joined the CFMS team. He has since been learning about the commissioning process from the experienced Project Managers at CFMS.

Return To Team

Daryoush graduated in 1999 with a Bachelor in Mechanical Engineering while in Iran. He has 9 years of experience as an operating engineer in Power Plant and 2 years experience in commissioning of buildings in Hunter Facilities Management Inc.

His career began at the Shahid Mohammad Montazari Power Plant in Isfahan, Iran. After he was trained for 2 years in the power plant industry, and obtained certificates pertaining to the work he successfully completed, Daryoush was promoted to an Operating Engineer for the 800MW power plant. During working as an Operating Engineer, he gained in-depth knowledge, including: turbines, boilers, cooling towers, centrifugal fans, condensers, pumps, air handling units, chillers, generators, automation controls, facilities operations and troubleshooting skills.

After immigrating to Canada in 2008, Daryoush worked for Hunter Facilities Management Inc, (HFM) as a Project Engineer. Through that time, he worked on new and retrofit construction, as well as total building commissioning services. Projects included Commercial, Institutional, Hospital, Government, and Community Service. Daryoush has also been involved with LEED projects.

Daryoush Marandi joined CFMS in 2010, bringing with him knowledge and experience with the commissioning process, building automation controls, and facilities operations, as well as the operation of power plants. His wealth of knowledge and experience make Daryoush an asset to the CFMS team.

Return To Team

Matt graduated from the University of Waterloo in June of 2010 with a Bachelor of Applied Science in Mechanical Engineering. His final year of studies focused on thermal fluid systems as it applies to HVAC design. The Waterloo engineering program is based around a cooperative learning/working experience where graduates must complete six four month engineering placements. Matt spent his final four co-op placements in the HVAC industry working for H.H. Angus Associates Limited and CFMS Consulting. He is a member of the PEO Engineer-In-Training program and is completing his studies towards a P. Eng. designation. Matt is currently working with all of the CFMS Project Managers to gain valuable experience in all aspects of the commissioning process.

Return To Team

Kristine Quan has a fine arts background. She made the move to the world of engineering in 1997, when she joined the St. Michael’s Hospital engineering department as an assistant to the Director of Engineering and Plant Services.

Kristine worked for over 2 years at St. Michael’s before taking a few years off to be a full-time mother to her two boys. While on sabbatical, Kristine continued to help at St. Michael’s Hospital – and she joined the CFMS team to provide occasional project assistance.

In 2006, Kristine came on-board full time at CFMS. Since then she has been involved with all aspects of CFMS’ business. Her job duties have included: field verification assistance, modifying and managing our accounting system, implementing a Human Resources program, and being a key member of our Sales & Marketing team.

Return To Team

Aysha immigrated to Canada in 1990, and began her career at “Pauline’s Pastries”, handling all accounting books, customer inquiries & other administrative duties. While working at Pauline’s, she continued to study part time, following various software programs. Aysha went into full time studies in 2009, graduating in Business office skills, specializing in accounting, with high honours. In her spare time, Aysha enjoys teaching cultural dancing to children and teens, having them participate in various concerts and cultural events. Aysha joined CFMS in the spring of 2010, as accounting and office support.

Return To Team

Mel graduated in Wales with a higher national certificate in electrical and electronic engineering. He then spent five years with Sauter Controls in London, UK, designing pneumatic and electrical control systems for building HVAC systems.

After immigrating to Canada in 1970, Mel worked for Honeywell and MCC Powers now called Siemens. He designed and commissioned several hospital control and building automation systems, including Scarborough Grace, Kingston General, Owen Sound and Hamilton hospitals. He has chaired the Energy Management Committee for BOMA and ASHRAE.

Mel joined Smith and Andersen Consulting Engineers in 1989 as their control consultant. In 1992, he founded CFMS Consulting Inc. to provide consulting services for commissioning building systems and facilities management.

The backbone of CFMS, Mel has grown the company from a small 2-person Toronto office to an organization that now provides commissioning services worldwide. Mel’s hands-on approach to managing projects, his sales and marketing acumen and strong leadership skills have earned him a solid reputation throughout the industry and make him a valued addition to any CFMS project.

Return To Team